Linux and EMC2 Step by Step

From Zen_Toolworks_Wiki

Jump to: navigation, search

NOTICE: This article is a Work In Progress. If you would like to contribute to this article, you are welcome to do so.

Additional information provided by original Author: no ETA

Please do not remove this template entry from this article. This will be done by the page administrator.

Last edit by CAlexander (talk ยท contrib)


  1. Hardware Requirements
  2. Software Download
    1. Download EMC2 Live CD 
    2. Create CD from the downloaded .ISO file
    3. Change computer's boot order to allow computer boot from CD
    4. Experiment with the live CD
  3. Install the Software
  4. Read the Getting Started Guide
  5. Stepper Motor Driver Board Wiring
  6. Configure EMC2 Software
EMC2-Step01.jpg
EMC2-Step02.jpg
EMC2-Step03.jpg
EMC2-Step04.jpg
EMC2-Step05.jpg
EMC2-Step06.jpg
EMC2-Step08.jpg
EMC2-Step09.jpg
Retrieved from "http://wiki.zentoolworks.com/index.php/Linux_and_EMC2_Step_by_Step"
Personal tools