Bit Usage Guide
From Zen_Toolworks_Wiki
NOTICE: This article is a Work In Progress. If you would like to contribute to this article, you are welcome to do so.
The expected date/time to have this article completed: as soon as I get more details --CAlexander 23:58, 8 September 2010 (UTC)
Please do not remove this template entry from this article. This will be done by the page administrator.
Last edit by CAlexander (talk ยท contrib)
Bits for Builds!
Many folk get confused and often choose the wrong bit for the job. There are so many different variables, each capible of changing the kind of bit you would use.
More is considered than just the material. Settings for depth, feedrate, curves, accelleration as well as RPM can change what kind of bit to use with your material.
We're standing up a reference table to help identify the general picks
| DESCRIPTION | BIT NAME | SIZE | IMAGE |
| What and how to use the bit. | What the bit name is | What sizes do we need |  |
| What and how to use the bit. | What the bit name is | What sizes do we need | |
| What and how to use the bit. | What the bit name is | What sizes do we need | |
